![background image](http://html.mh-extra.com/html/desa/vf-30p-pjd/vf-30p-pjd_owners-operating-and-installation-manual_2485977002.webp)
www.fmiproducts.com
111826-04E
2
SAFETy
WARNING: Improper
installation, adjustment,
alteration, service or
maintenance can cause
injury or property dam
-
age. Refer to this manual
for correct installation
and operational proce
-
dures. For assistance or
additional information
consult a qualified in
-
staller, service agency or
the gas supplier.
WARNING: This ap
-
pliance is for installation
only in a solid-fuel burning
masonry or UL127 factory-
built fireplace or in a listed
ventless firebox enclo
-
sure. It is design-certified
for these installations in
accordance with ANSI
Z21.11.2. Exception: Do
not install this appliance
in a factory-built fireplace
that includes instructions
stating it has not been test
-
ed or should not be used
with unvented gas logs.
WARNING: This is an
unvented gas-fired heat
-
er. It uses air (oxygen)
from the room in which
it is installed. Provisions
for adequate combustion
and ventilation air must
be provided. Refer to
Air
for Combustion and Ven-
tilation
section on page 6
of this manual.
This appliance may be in
-
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib
-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
TABLE OF CONTENTS
Safety .................................................................. 2
Product Identification
........................................... 5
Local Codes......................................................... 5
Unpacking............................................................ 5
Product Features ................................................. 6
Air For Combustion and Ventilation ..................... 6
Installation ........................................................... 8
Operation ........................................................... 16
Inspecting Burners ............................................ 20
Cleaning and Maintenance ................................ 21
Troubleshooting ................................................. 22
Specifications
.................................................... 25
Service Hints ..................................................... 25
Technical Service............................................... 25
Replacement Parts ............................................ 26
Accessories ....................................................... 26
Wiring Diagram .................................................. 27
Parts .................................................................. 28
Warranty ..............................................Back Cover