Derksen 20025510, Information For Use

Page: 33 / 76

Moun�ng
En
gl
is
h
PHOS pole mount 33 / 76
a. b.
4.2. Fitting the mounting bracket
When completing the following steps, ensure that you fit
the screws, spring rings and washers in the sequence spe-
cified. Use the hexagon socket wrench supplied to do so.
1. Position the mounting bracket over the fixing arm of
the PHOS pole mount so that the centre hole is over
the upper thread.
2. Fit the mounting bracket with the cylinder head screw
M6 x 12 (c.), spring washer M6 (b.) and washer M6
small (a.) in the position shown in the diagram.
3. Fit the second cylinder head screw M6 x 12 (c.) with
spring ring M6 (b.) and washer M6 big (a.) into the arc
shaped long hole and on the lower thread.
4. Check that the mounting bracket is fitted firmly to the
projector.
c.
a. b. c.