Derksen 20025510, Information For Use

Page: 31 / 76

Moun�ng
En
gl
is
h
PHOS pole mount 31 / 76
4.1. Attaching the mounting plate
1. Bend a piece of the mounting strap approximately
5 cm / 2 '' long back by 180°. The gap created by this
hook should be about 5 mm / 0.2 ''.
2. Feed the mounting strap under the clamping screw
and into the turnbuckle as shown.
5 cm
5
m
m
3. Pull in the mounting strap until the hook engages fully
in the turnbuckle.
4. Thread the mounting strap into the mounting plate.
The angled surfaces of the mounting plate and the
turnbuckle, which will later surround the mast, must
be aligned.
5. Loop the mounting strap around the mast. As far as
possible, position the turnbuckle opposite the mount-
ing plate.
6. Guide the free end through the slot in the clamping
screw.