Page 10
Install the Front Panel Assembly into the Case.
1) Slide the front panel assembly in from the front of the case. The front panel may be snug as it goes
into the case bezel. If this is the case, work the panel in bit-by-bit, keeping the amount of insertion
on all four sides approximately equal as you work the panel backwards into place (where the
mounting bracket’s threaded holes line up with the four holes in the bottom of the case).
2) Attach the front panel support bracket using four of the #6 screws you set aside during disassem-
bly of the case. Lockwashers go under the two screws closest to the rear the panel. The
lockwashers ensure an electrical connection between the chassis and the front mounting bracket
for better static protection.