![Denyo GAW-185ES2 Instruction Manual Download Page 14](http://html1.mh-extra.com/html/denyo/gaw-185es2/gaw-185es2_instruction-manual_2485073014.webp)
Periodic inspection and maintenance
GAW-185ES2
- 28 -
2. Conveyance and installation
2-1 Precautions for conveyance of the machine
CAUTION
: Removal
(1)
Falling during hoisting
•
Use the lifting lug located at the center of the roof panel for hoisting
the machine. Furthermore, do not walk in to the space underneath
the machine in the hoisted state.
•
Do not hoist the machine by the handle (rope fitting).
The handle will come off and the machine will fall if the machine
is hoisted by the handle.
(2)
Falling during conveyance
•
For conveyance of the machine on a truck or the like, fix two handles
using ropes or the like so that the machine will not move out of the
position.
•
In case the machine is provided with wheels, positively lock the
wheels.
The machine will fall, if the above precautions are neglected.
CAUTION
: Wheel stoppers
•
Use the machine in a level position on a solid ground.
If the machine is used on a slope under unavoidable circumstances, the
tolerance in the gradient is ±5
°
on each of longitudinal and lateral
directions.
•
Make sure to lock wheels using wheel stoppers, except the occasion of
removal.
The machine may begin to move and run away, unless wheel
stoppers are fitted.
For conveyance of the machine from the field of work, be sure to load the machine on a truck or the like.
Dimensions of the machine are as follows.
Length
(mm)
Width
(mm)
Height
(mm)
Dry mass
(kg)
Fully equipped
mass (kg)
730
555
675
105
118
Dry mass: Mass without cooling water, lubricating oil and fuel
Fully equipped mass: Mass with cooling water, lubricating oil, battery 1electolyte (to the specified level)
and fuel (full tank)
See “External dimensions and appearance drawing” for details.
Wheel Stopper
•
The machine equipped wheel stopper and operate Lock/Off by
the lever
•
Make sure to wheel stopper lock position, when operate the
machine and conveyance of the machine on a truck
•
When move the machine by wheel, make sure to wheel stopper
off position.
Lifting lug
Handle (rope fitting)
Fix using ropes
Wheel
stoppers
Wheel
Stopper
Lock
OFF
Lever