5 - 4 Shut down
(1) Turn OFF the circuit breaker of the load.
(2) Turn OFF the circuit breaker of the machine.
(3) Turn the throttle handle to “LOW SPEED"
circuit breaker of the load
circuit breaker of the machine
(counter clockwise) to adjust the revolution
frequency within the range of 750 to 900mm'1,
and drive the engine for approximately five minutes.
(4) Check the panel light goes out.
(5) Set the starter switch in "STOP" position.
The engine will stop immediately.
(6) Remove the key from the starter
switch and keep it at hand.
(7) Check the amount of fuel. Supply
additional fuel if necessary.
(8) Check for leakage of oil, fuel and
water.
[Note]
*
For emergency stop, keep pushing
the "EMERGENCY STOP" button
until the engine stops.
*
Check the panel light goes out.
- 44 -
