A CAUTION
* Do not start the engine when the machine and the load circuit breaker are ON, or else,
power is supplied to the load at the start of the engine which causes electric shocks or
trouble in the load.
Startup procedure:
(1) Make sure that the circuit breakers of
the machine and the loads are all OFF.
(2) Turn the throttle handle toward the
HIGH SPEED (clock wise) two or three
times.
(3) Set the starter in "Preheat" position.
This switch must be ON until the preheat lamp
becomes red heated.
Turn the starter switch to "START"
position until engine starts.
[Note]
If the engine is warm, the preheat operation is
not required.
S E E
П OFF
It will indicate the after glowing lamp when turning on the Starter Switch to
"GLOW" position. However, this doesn't mean glowing, but you must keep glowing until
the Glow Lamp is heated to red color.
- 41 -
