5. Operation
— From pre-start check to shut down —
Be sure to check the machine prior to starting.
1. Pre-start check : Check oil, cooling water, fuel and so on.
2. Periodical check: Check each part of the machine according to operating time.
3. Startup: Check the surroundings of the machine for safe operation.
Use a sign before startup.
4. Operation: / К In the machine there are moving parts, high temperature parts and
high voltage parts. Before operating, close the door and lock the side
door for safe operation and for prevention of noise.
[Note]
If the warning lamp lights, stop the engine and check the cause of it.
[Note]
Check for leaks of oil, water, exhaust gases, and for unusual noise.
5. Shut down
5— 1 Checking prior to operation
A
WARNING
MOVING PARTS can cause severe injury.
■ Rotary unit which runs at a high speed is located
in the machine.
(Note that it is very dangerous if you touch it.)
* Be sure to close the door and lock it during operation.
* When making check or maintenance of the machine,
be sure to stop the machine in advance.
-
34
-
