CAUSE: The SmartLite
®
Max Light is in sleep mode.
SOLUTION: Press any button once to bring the unit out of sleep mode. The display should illuminate when this
is done.
PROBLEM: The head or handle is getting hot.
CAUSE: Unit has been used for too many consecutive cycles.
SOLUTION: Place the SmartLite
®
Max Light in the charger, or set the unit on a counter, and allow it to cool
down for at least 6 minutes.
PROBLEM: Power output indicated on the cradle does not match the results from another power meter.
CAUSE: The cradle power meter is not a quantitative measuring device.
SOLUTION: The power meter incorporated into the charging cradle is meant as a simple diagnostic tool only,
and is calibrated to the output performance of the SmartLite
®
Max Light. Other curing lights may
not give a similar result on the SmartLite
®
Max Light power meter as the SmartLite
®
Max Light
does. Due to the oval shape and dispersion angle of the SmartLite
®
Max Light, the power
measured on another power meter may not be accurate.
PROBLEM: The power meter doesn’t show a green bar when the output is measured.
CAUSE: SmartLite
®
Max Light head is not placed in the sensor correctly.
SOLUTION: Make sure the SmartLite
®
Max Light head is resting securely in the sensor, with the head resting
against the sensor face.
CAUSE: SmartLite
®
Max Light is in Pulse mode.
SOLUTION: Do not measure the power output in Pulse mode. Select another mode to measure the power
output.
PROBLEM: I can’t select the time in Boost mode.
CAUSE: Timer function is not available in Boost mode.
SOLUTION: If more time is desired, either use the Boost mode repeatedly at the 5 second curing cycle, or
select another function and choose the desired curing time.
PROBLEM: I press Start, but no light comes out.
CAUSE: Head is not attached properly.
SOLUTION: Make sure the head is pushed completely into the handle, such that the head connector is not
visible.
PROBLEM: I’ve been using the unit for several cycles and it suddenly stopped working.
CAUSE: Temperature overload – sensor has activated.
SOLUTION: The SmartLite
®
Max Light is equipped with a temperature overload sensor to protect the LEDs
from excessive heat. If this occurs, place the unit in the cradle or on the counter and wait at least
6 minutes for the unit to cool.
CAUSE: Battery has been drained.
SOLUTION: The battery has been drained of its stored energy. Place the unit in the charging cradle, or attach
the power supply to the handle.
PROBLEM: The red battery low indicator light is on and I plugged in the power cord, but the light still
won’t function.
CAUSE: The light has to reset when the battery low indicator light is on continuously and the power cord is
plugged in for corded use.
SOLUTION: plug in the power cord and let the light reset for several minutes before use.
8
