Page 38
Residual heat
CAUTION!
Burn hazard caused by residual heat of the furnace!
Even when turned off, the unit may still be very hot from a previous
heating cycle. Burn hazard when touching the walls of the heating
chamber or the lifting plate!
Therefore:
Before working on the furnace, make sure that it has cooled
sufficiently. The furnace requires at least 12 hours to cool from
maximum temperature to approximately room temperature.
9.2 Troubleshooting messages
Displayed
In the event of a controller error, the display will show an error message in plain text.
These messages are listed in the following table.
