Page 35
8
Additional functions
8.1 Speed sintering with Cercon materials
This option facilitates sintering within only 90 minutes at heating and cooling rates of up to 70°C/min.
NOTE!
Speed-sintering programs 3 and 6 for Cercon base and ht are only suitable for bridge
spans of up to 6 units.
With speed-sintering programs for Cercon materials, only the supplied speed-sintering
bowls must be used.
Standard bowls are not suitable for heating rates above
30°C/min.
Fig. 37:
Speed program.
Sintering programs 3 and 6 have been predefined for speed-
sintering Cercon materials.
The speed-sintering programs are suitable for single crowns and
for bridges with up to six units.
NOTE!
As soon as the hot furnace opens the furnace door,
the display will flash to warn the operator that the
sintering bowl is hot.
The flashing ends when the oven temperature is
below 280°C. At this temperature, the sintering
bowls have a guaranteed maximum temperature of
105°C.
