65 71 165 D3639
16
D3639
.
201.01.04
.
02 10.2017
2 Safety instructions
Dentsply Sirona
2.6 Product-specific safety instructions
Operating Instructions CEREC SpeedFire
WARNING
Risk of burns due to objects falling out
As there is a serious risk of burns in this case, it is essential to install a
fire-proof table and floor covering.
I. For safety reasons, the furnace must be operated when standing. This
is the only way that the user can quickly avoid any parts that fall out.
II. You are advised to wear heat-proof protective clothing when carrying
out super speed sintering. In accordance with professional association
regulations, the operator of the site is responsible for providing the user
with appropriate protective clothing.
III. The operator of the site is responsible for providing the user with
appropriate safety instructions.
IV. If a fracture occurs during the sintering process as a result of a failure
to follow the recommended drying procedure, there is a risk that hot
objects will fall out as soon as the furnace door is opened.
V. The furnace should only be loaded and unloaded using the tweezers.
For safety reasons, a trained user must be present when the furnace is
being loaded or unloaded.
WARNING
Risk of burns due to hot surfaces
The unit may develop hot surfaces in some areas after extended use.
Use the necessary caution around the unit, especially when the furnace
is operated for extended periods.
➢ Never touch the hot surfaces.