65 71 165 D3639
24
D3639
.
201.01.04
.
02 10.2017
3 Product description
Dentsply Sirona
3.5 Electromagnetic compatibility
Operating Instructions CEREC SpeedFire
3.5
Electromagnetic compatibility
Observance of the following information is necessary to ensure safe
operation regarding EMC aspects.
CEREC SpeedFire complies with the requirements for electromagnetic
compatibility (EMC) according to DIN EN 61326-1:2006-10.
CEREC SpeedFire is hereinafter referred to as "UNIT".
3.5.1
Electromagnetic emission
The UNIT is intended for operation in the electromagnetic environment
specified below.
The customer or user of the UNIT should make sure that it is used in such
an environment.
Emission measurement
Conformity
Electromagnetic environment - guidelines
RF emissions according to CISPR 11
Group 1
The UNIT uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
RF emissions according to CISPR 11
Class B
The UNIT is intended for use in all facilities,
including residential areas and in any facilities
connected directly to a public power supply
providing electricity to buildings used for residential
purposes.
Harmonics
according to IEC 61000-3-2
Class A
Voltage fluctuations / flicker according
to IEC 61000-3-3
coincides
