65 71 165 D3639
32
D3639
.
201.01.04
.
02 10.2017
4 Transport and commissioning
Dentsply Sirona
4.6 Commissioning
Operating Instructions CEREC SpeedFire
4.6
Commissioning
4.6.1
Insert the storage tray baseplate
➢ Place the baseplate also supplied into the storage area provided
above the fan.
4.6.2
Switching the unit ON and OFF
Switch on the unit
1. Use the main switch on the rear of the unit to switch it on.
2. Press the start button on the control panel until the unit’s strip of LEDs
lights up.
ª
The unit completes a system check and starts the application
software.
Switching the unit off
1. To switch off the unit again, press and hold the start button on the
control panel for several seconds.
or
➢
You can also use the main switch on the rear of the unit to switch
it off.
Open door
1. Open the door in order to insert the door insulation also supplied.
2. Go to the Settings menu /
"Service" / "open/ close door" , in order to
activate the opening of the door.
3. Close the menu after opening in order to arrive at the main view.
NOTICE
Only switch on the unit once you have connected the network cable.
