Dentsply Sirona
Operating Instructions (valid for Canada)
6 Installation and startup
6.5 Commissioning
66 37 487 D3652
D3652.201.01.21.02 03.2021
39
English
6.5.2
Plug connections
NOTE
Failure of the CEREC Omnicam
The CEREC Omnicam is a high-precision optoelectronic scanning
instrument for non-contact impression taking which requires careful
handling. Incorrect handling (impacts, dropping) leads to failure of the
CEREC Omnicam.
➢ Always place the sensitive CEREC Omnicam in its cradle!
NOTE
Do not damage cable
If you pull on the cable itself in order to unplug it or to check the plug
connection, you will damage the cable.
➢ Never pull on the cable.
NOTE
Positioning coupling box
The coupling box must be positioned outside of the patient
environment.
The coupling box must not be placed on the floor.
The coupling box must not be positioned in the connection box of the
treatment unit (applies to CEREC AI/CEREC AI Connect).
CAUTION
Positioning camera cradle
The camera cradle for the CEREC AF/CEREC AF Connect must be
placed on a flat, horizontal surface either inside or outside of the
patient environment. Ensure that the camera cradle cable does not
pose a safety risk. This applies in particular to the use of the optional
extension cable between the camera and camera cradle.
CAUTION
Trip/fall hazard
When installing the supply cable (the cable between the coupling box
and the camera storage cradle) there might be a risk of tripping.
➢ Lay the cable so that there is no risk of tripping.
➢ Attach the supply line so that it remains fixed at all times.
CAUTION
CEREC AI for Rear
Place the camera in the camera cradle and position the table with the
camera cradle in such a way that there is no risk of tripping.
WARNING
Hazard for patient and user
If you do not use freely accessible sockets, there is a risk of injury to
patients and users.
➢ Only use sockets which are freely accessible at all times. This
ensures swift disconnection from the power.
