DentalEZ Core, User Manual, Page: 37 / 57

www.DentalEZ.com 866-DTE-INFO
34
CORE
TM
Magellan Unit
PN: 2717-267C
Syringe Foot Control
Section V Operation
The syringe is designed to deliver air or water, or a
mixture of air and water, as required.
• To deliver water only, press the button on the
syringe marked with a water drop symbol.
• For air only, press the button on the syringe
with no marking.
• To get a spray mixture of air and water, press
both buttons simultaneously.
The speed of the handpiece is controlled by
depressing the disc located on the foot control
(Figure 38) .
• A light pressure on the foot control disc
causes a slow speed.
• Full pressure on the disc causes the
handpiece to operate at full speed.
NOTE:
The optional coolant water spray ON/OFF
function is also controlled by using the toggle
located on the foot control as described above.
Chipblower
If the handpiece utilizes coolant air, the
chipblower is used to blow debris away from the
cutting site by creating an air blast through the
handpiece without causing the bur to rotate. To
operate the chip blower, depress and hold down
the valve on the upper right of the foot control.
Optional Fiber Optics
The fi ber optics control is automatically activated
by operating the handpiece using the foot control.
NOTE:
When the foot control is released, the fi ber
optics light will stay on for approximately ten (10)
seconds to allow inspection of the cutting site.
Figure 38. Foot control disc
WET/DRY
Toggle
Chip Air
Valve
Dry Wet