33
USING THE STERILIZER - 5
5.9
Setting the CUSTOM - S5 program
The CUSTOM - S5 program is the only one that can be customized by the operator.
To access the S5 program setting functions, press the
SET
button and then the
CUSTOM
button.
Each time the
SET
button is pressed, a different specific function is displayed, which can be changed by pressing the
and
buttons.
The functions accessed by repeatedly pressing the
SET
button are described in the following table.
Press the
SET
button and then
the
CUSTOM
button to access the
temperature settings
The PRESS display shows:
SET TEMP
Set the sterilization temperature parameter,
which can vary from 105°C to 135°C, using
the
and buttons.
Press the
SET
button once more to
access the process time settings
The PRESS display shows:
SET TIME
Set the process time parameter, which can
be between 3 and 90 minutes, using the
and buttons.
Press the
SET
button once more
to access the programming for the
vacuum (VAC) and drying (DRY)
phases
The PRESS display shows:
VAC
or
DRY
Use the
button to set the vacuum phases,
which can be: 2, 3 or 4.
The value is shown on the display next to the
word
VAC
.
Use the
button to set the duration of the
drying phases, which can be: 3+2 or 6+4 or
8+6 minutes.
The value is shown on the display next to the
word
DRY
.
Press the
SET
button once more to exit programming.
The set parameters are automatically saved and kept until subsequent programming with new values.
CAUTION
The combination of time and temperature parameters set by the operator can lead to cycles that
do not ensure sterilization.
The effectiveness of the sterilization cycle in the S5 custom program should be verified with
appropriate tests.
At the end of the S5 program, only the READY LED lights up, without the STERILIZE LED, to indicate
that the effectiveness of the cycle set by the operator has not been verified by the manufacturer.
