13
2.5 Scanning Codes
Follow the procedure below to scan codes.
(1) Move the code reading window close to the code, and then either start from the user application or
press the trigger switch. Light for scanning is irradiated.
(2) When the scanning is successfully completed, the status indicator will illuminate in blue and the
beeper will be sounded.
Notice on code scanning
・
Readable area specified by the light irradiation area is a target area, but does not guarantee the
scanning of codes in the light irradiation area.
・
Readable area is narrower than the light irradiation area. When the scanning distance is 10 cm,
the readable area is approximately 6 X 4 cm.
・
Only one code can be contained in the readable area. If there is more than one code in the
readable area, a scanner may not be able to scan codes or may continue alternate code scanning.
If the multi-line barcode scanning is permitted and if the split QR Code scanning is configured
as the batch edit mode, however, more than one code can be scanned all at once.
・
A code can be scanned in all direction, but scan it at the position where it is securely within the
reading area including the margin.
・
A part of light reflected on the label may become extremely strong according to an angle between
the irradiated light of a scanner or room light, and the label, which may cause the specular
reflection and disable the code scanning. In this case, adjust the angle and/or distance between
the label and the scanner.
