76
Items Parameters
Defaults
Refer
to:
Transmit a/b/c/d
√
Transmit A/B/C/D
Transmission of Start/Stop codes
for Codabar (NW-7)
Disable
Section 12.2
MOD-16
√
Check digit method for Codabar (NW-7)
7-check method
Section 12.2
Code 39
Item Parameters
Defaults
Refer
to:
Enable, without a check digit
√
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Reading Code 39
Disable
Section 12.2
Minimum number of readable digits
for Code 39
1 digit
Maximum number of readable digits
for Code 39
1 to 99 digits
(excluding start/stop codes)
99 digits
(See Note 1.)
Enable
Transmission of Start/Stop codes
for Code 39
Disable
√
Section 12.2
Enable
Conversion to FULL ASCII
Disable
√
Section 12.2
Code 128, EAN-128 (GS1-128)
Items Parameters
Defaults
Refer
to:
Enable
√
Reading Code 128
Disable
Enable
√
Reading EAN-128 (GS1-128)
Disable
Section 12.2
(See Note 2.)
Minimum number of readable digits
for Code 128
1 digit
Maximum number of readable digits
for Code 128
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
99 digits
(See Note 1.)
Disable
Transmission of FNC1 for Code 128
Transmit GS
√
Section 12.2
Minimum number of readable digits
for EAN-128 (GS1-128)
1 digit
Maximum number of readable digits
for EAN-128 (GS1-128)
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
99 digits
(See Note 1.)
Disable
Transmission of FNC1 for EAN-128
(GS1-128)
Transmit GS
√
Section 12.2
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and EAN-128
(GS1-128) at
the same time.
: Can be changed only with the configuration software.
