3
2.2 Connecting the Interface Cable to the Scanner
(1) Pull the connector cover of the interface cable off its connector as shown below.
(2) Plug the interface cable connector into the connector located in the bottom of the scanner.
Note:
As shown below, hold the scanner body, align the
mark on the cable connector with that on the scanner,
and fully insert the interface cable connector.
(3) Align the two bosses on the connector cover with cutouts in the scanner body, fit the connector cover into the
scanner, and turn it clockwise to lock it.
Scanner
Connector cover
Interface cable connector
mark
mark
Connector cover
Boss
Connector cover
Cutout
Turn the cover until
its bosses come to be
horizontal.
