54
(6) Number of digits
This optional field specifies whether or not to transmit the number of digits (2 or 4 bytes) of code data to transmit or
disables the transmission (default). Note that UPC and EAN codes (except EAN-128 (GS1-128)) skip this field.
n1 : thousands (0 to 9)
n2 : hundreds (0 to 9)
n3 : tens (0 to 9)
n4 : units (0 to 9)
Selecting the two-digit length does not transmit n1 or n2.
(7) Code data
The data format for each symbology is described below.
QR Code/MicroQR Code
Code data read will be transmitted as is.
Split QR Code
In edit mode and batch edit mode
: The scanner edits code data read and then transmits it. It does not transmit the code
number, number of splits, or parity.
In non-edit mode:
The scanner transmits the code number, the number of splits, parity, and code data read. The code
number and the number of splits are 1 byte each and the parity, 2 bytes in hexadecimal format.
PDF417, MicroPDF417, MaxiCode and Data Matrix
Code data read will be transmitted as is.
UPC-A
You can select whether or not to transmit the padding character "0," number system character "S," and a check digit to
the host. Disabling the transmission of the number system character "S" automatically disables the transmission of the
padding character "0."
The conversion to the GTIN format is selectable. For the GTIN format conversion, refer to Section 9.5.
When the conversion to the GTIN format is disabled, the following format applies.
0 S X
1
X
2
X
3
X
4
X
5
X
6
X
7
X
8
X
9
X
10
C/D
0: Padding character for adjustment of the data length
S: Number system character
UPC-A with add-on
A code ID mark precedes add-on code data under the conditions "Code ID mark: Type 4" and "Code ID mark output
mode: Separating." (For details about the code ID mark, refer to (5) Code ID mark on pages 49 to 53.)
The conversion to the GTIN format is selectable. For the GTIN format conversion, refer to Section 9.5.
When the conversion to the GTIN format is disabled, the following formats apply.
With 2-digit add-on:
0 S X
1
X
2
X
3
X
4
X
5
X
6
X
7
X
8
X
9
X
10
C/D X
11
X
12
With 5-digit add-on:
0 S X
1
X
2
X
3
X
4
X
5
X
6
X
7
X
8
X
9
X
10
C/D X
11
X
12
X
13
X
14
X
15
0: Padding character for adjustment of the data length
S: Number system character
X
11-15
: Add-on code data
