© by DENQBAR GmbH
http://www.denqbar.com
58
power of the generator. In this case, the seller as well as the manufacturer, gives no warranty.
Use of alternating current (AC)
1. Turn on the device and check that the operating display lights up.
2. Ensure that the desired consumer is turned off and only then insert the power plug of the
consumer into the power socket.
Attention!
An overload of the generator, indicated by
OVER
in the field
P
of the operating display, may
damage the generator.
If the device shows abnormal action, for example slowed reaction or abrupt shut down, it must
be turned off immediately. Disconnect the consumer from the generator and check whether
the problem is caused by the consumer, or whether the rated power of the generator was
exceeded.
Use of continuous current (DC)
1. Turn on the device and check that the operating display lights up.
2. Ensure that the desired consumer is turned off and only then connect the cable of the
consumer with the DC-socket.
NOTICE!
In DC operation (DC), turn the switch of the fuel economy mode into position "OFF".
Overload protection
230 V-socket:
the operating display lights up at normal operation
Operating display
AC-power
outlet
