© by DENQBAR GmbH
http://www.denqbar.com
66
12. Troubleshooting
1. Engine does not start
NO
YES
NO
YES
NO
YES
NO
YES
NO
no spark
YES
Inspection:
1. Pull off plug connector from the spark plug, clean spark plug and plug connector.
2. Disassemble spark plug and insert into plug connector.
3. Connect spark plug to earth.
4. Pull the wire starter and see whether there is an ignition spark.
2. Connected consumers do not turn on
No
Yes
No
Yes
Enough gas?
Ignition key in the ignotion lock on
position “ON and fuel tap open?
Enough oil?
Fill in fuel
Put ignition key to position “ON” and
open the fuel tap
Fill in oil
Replace spark plug
Have generator repaired by
authorized specialist
If the engine still does not start, please send the generator to one of our authorized dealers for repair.
Is there a short circuit in the
connected consumer?
Please send generator to authorized
dealer for repair
Please send generator to authorized
dealer for repair
1. Exchange consumer
2. Have consumer repaired
Does the spark plug work?
For electrical start: battery
charged enough?
Recharge or replace the battery
Is the operating display on?
