![background image](http://html1.mh-extra.com/html/denon/dnhd2500-dual-dj-mp3-player/dnhd2500-dual-dj-mp3-player_service-manual_2481151008.webp)
8
DN-HD2500
2.4
HDD_Format
mode
・
Turn the Deck1 or Deck2 PARAMETERS knob
to select "HDD_Format" from the FUNCTION
check mode's top menu, then press the
PARAMETERS knob to set "HDD_Format"
mode.
・
When the PARAMETERS knob is pressed, the
format confirmation message appears.
・
When the PARAMETERS knob is pressed, for-
matting starts and the internal hard disk is for-
matted in FAT32.
Note that when the hard disk is formatted,
all the data on the hard disk is erased irre-
trievably.
・
"Complete!!" is displayed when initialization is
completed normally, "Fail" is displayed if for-
matting is completed abnormally.
In the latter case, formatting is not possible in
this mode. Use a disk formatter (freeware or
other, for example symantec's "Norton Ghost",
operation not guaranteed) to format the disk in
FAT32.
・
When the BACK (
) button is pressed
before formatting has been executed, the
FUNCTION check mode's top menu reap-
pears.
2.5
DRIVE_Check
mode
・
Connect the transmission and reception pins
of the DRIVE terminal to an external device
(loop back) and supply DC +5.5V to the power
terminal.
・
Turn the Deck1 or Deck2 PARAMETERS knob
to select "DRIVE_Check" from the FUNCTION
check mode's top menu, then press the
PARAMETERS knob to set "DRIVE_Check"
mode.
・
Data is transmitted from the DRIVE terminal
and whether or not the sent data can be
received is checked.
The checking status and results are displayed.
No
Mode
Operation and Function
Display
The progress of
formatting and the
message indicating
that formatting has
been completed are
displayed here.
When the process
has completed
normally
When the process
has completed
abnormally
The checking status
and results are
displayed here.
When the process
has completed
normally
When the process
has completed
abnormally
2.4
HDD̲Format
モード
・Deck1 または Deck2 の PARAMETERS ノブを回
わして、FUNCTION チェックモード画面から
HDD̲Format を選択し、PARAMETERS ノブを
押して確定します。
・PARAMETERS ノブを押すと、フォーマット確
認メッセージが表示されます。
・PARAMETERS ノブを押すと、フォーマットを
開始し、内蔵 HDD を FAT32 でフォーマットし
ます。
フォーマットを行うと、ハードディスクの全
てのデータが消去されますので、ご注意くだ
さい。
・フォーマットが正常に終了すると、Complete!!
を表示します。異常終了時は、Fail を表示しま
す。
異常終了となると、このモードではフォー
マットできません。DISK FORMATER(フリー
ソフト、 有償ソフト(例 : s y m a n t e c 製
Norton Ghost 但し、動作は未確認です。)等
で、 FAT32 フォーマットを行ってください。
・フォーマット実行前に BACK(
) ボタンを
押すと、FUNCTION チェックモードの TOP 画
面に戻ります。
2.5
DRIVE̲Check
モード
・DRIVE 端子の送信端子と受信端子を機器外部
で接続(ループバック)し、電源端子にDC+5.5V
を供給します。
・Deck1 または Deck2 の PARAMETERS ノブを回
わして、FUNCTION チェックモード画面から
DRIVE̲Check を選択し、PARAMETERS ノブを
押して確定します。
・DRIVE 端子からデータを送信し、送信データ
が受信できるかをチェックします。
チェック状態と結果が表示されます。
チェックを行います。
No
モード
操 作 と 機 能
表 示
この部分にフォーマッ
トの進行状態と終了メ
ッセージが表示されます。
正常終了時
異常終了時
この部分にチェック
状態とチェック結果
が表示されます。
正常終了時
異常終了時
Summary of Contents for DNHD2500 - Dual DJ MP3 Player
