![background image](http://html1.mh-extra.com/html/denon/dnhd2500-dual-dj-mp3-player/dnhd2500-dual-dj-mp3-player_service-manual_2481151015.webp)
15
DN-HD2500
5
PANEL CHK
mode
・
Turn the Deck1 or Deck2 PARAMETERS knob
to select "PANEL CHK" from the service
mode's top menu, then press the PARAME-
TERS knob to set "PANEL CHK" mode, and
then the "PANEL CHK" mode screen appears.
・
Checks (1) to (6) are performed.
1) FADERIN signal
When the cue or play signal is received on
the FADER1 and FADER2 terminal, the
"FADERIN CUE" or "FADERIN PLAY" check-
box on the screen is highlighted for 0.5 sec-
onds.
2) PARAMETERS knob
The checkbox display toggles between black
and white each time the PARAMETERS
knob is pressed.
When the PARAMETERS knob is turned, ->
(clockwise) or <- (counterclockwise) is dis-
played.
3) JOG disc
When the unit detects that the JOG disc has
been touched, the checkbox is highlighted
and the position of detection ("Right",
"Down", "Left" or "Up") is displayed in the [ ]
section.
・
When the JOG disc is turned, -> (clockwise)
or <- (counterclockwise) is displayed.
The counter value of the turning pulse num-
ber of the JOG disc is indicated on the
"COUNT" section within the range of 0 to
65535, counting up when turned clockwise,
down when turned counterclockwise.
・
The count value for back spin checking is
indicated on the "COUNT" section. "0" is
displayed if you touch the JOG disc, "move"
if you turn it, and the number of rotations if
you stop it. If values of three rotations and
greater are displayed, things are normal.
・
The counter value of the turning pulse width
of the JOG disc is indicated on the
"WIDTH" section within the range of 0 to
65535, decreasing when turned quickly,
increasing when turned slowly.
・
When the pulse width is set, the pulse width
setting flag checkbox ("WD") is highlighted.
The counter value of the turning pulse
width of the JOG disc and pulse width set-
ting flag are for design examination. For
this reason, do not use them as judging
criteria for the jog dial; handle them as ref-
erence data.
4) PITCH slider
The pitch slider's position reading value is
displayed on the "PITCH" section, the center
tap's position reading value at the "CENTER"
section, both within a range of 0 to 1022.
・
Fader value :
MAX
1018 or more
Click point Center Tap value
±
25
MIN
6 or less
・
Center Tap value
MAX
435
〜
589
No
Mode
Operation and Function
Display
2
2
Display when not in the touch count operation mode
("PANEL CHK" mode initial screen)
5
PANEL CHK
モード
・Deck1 または Deck2 の PARAMETERS ノブを回
わして、サービスモードのTOP画面からPANEL
CHK を選択し、PARAMETERS ノブを押して確
定します。PANEL CHK モードの画面となり、
①〜⑥のチェックを行います。
① FADER IN 信号
FADER1、2 端子上で CUE 信号または PLAY
信号を受信すると、画面の FADERIN CUE ま
たは FADERIN PLAY のチェックボックスが
0.5 秒間反転表示します。
② PARAMETERS ノブ
PARAMETERS ノブを押す毎にチェックボッ
クスを白 / 黒にトグル表示します。
PARAMETERS ノブを回転させると、回転方
向に応じて、->(右回転)、<-(左回転)
を表示します。
③ JOG ディスク
J O G
ディスクのタッチを検出すると、
チェックボックスを反転表示し、[ ]部に
検出位置を Right、Down、Left、Up で表示
します。
・JOG ディスクを回転させると、回転方向
に応じて、->(右回転)、<-(左回転) を
表示します。
JOG ディスクの回転パルス数のカウンタ
値を COUNT 部に 0 〜 65535 の範囲で表
示します。右回しでカウントアップし、左
回しでカウントダウンします。
・バックスピン確認用カウント値を COUNT
部に表示します。JOG ディスクに触れる
と "0" を表示し、回転させると "move" を
表示し、停止すると回転数を表示します。
3 回転以上の値が表示されれば正常です。
・JOG ディスクの回転パルス幅のカウンタ
値を WIDTH 部に 0 〜 65535 の範囲で表示
します。早く回すと小さな値に、遅く回す
と大きな値になります。
・パルス幅が確定すると、パルス幅確定フ
ラグ WD チェックボックスを反転表示し
ます。
JOG ディスクの回転パルス幅のカウンタ値及
びパルス幅確定フラグは、設計検討用のため
JOG ダイヤルの判定基準に使用せず、参考
データとして扱ってください。
④ピッチスライダ
ピッチスライダの位置読取値をPITCH部に、
センタータップの位置読取り値を CENTER
部に0〜 1022 の範囲で表示します。
・フェーダー値
最大
1018 以上
クリック点
センタータップ値 ± 25
最小
6 以下
・センタータップ値
最大
435 〜 589
No
モード
操 作 と 機 能
表 示
2
2
タッチカウント動作モードでない時の表示
( PANEL CHKモード初期画面 )
Summary of Contents for DNHD2500 - Dual DJ MP3 Player
