![background image](http://html1.mh-extra.com/html/denon/dnhd2500-dual-dj-mp3-player/dnhd2500-dual-dj-mp3-player_service-manual_2481151006.webp)
6
DN-HD2500
2
FUNCTION check
mode
・
Turn the Deck1 or Deck2 PARAMETERS knob
to select "FUNCTION CHK" from the service
mode's top menu, then press the PARAME-
TERS knob to set the function check mode.
1) ---Top menu---
The top of the menu for the function check
mode appears.
2) HD2500_Init
The contents of the preset memory are set to
the factory defaults.
3) *RAM_Check
Not yet used.
4) *CPU-DSP_Check
Not yet used.
5) HDD_Format
The internal hard disk is formatted in FAT32.
6) DRIVE_Check
DRIVE terminal transmission/reception is
checked.
7) *Audio_OSC
Not yet used.
8) TOUCH_Init
The JOG dial's touch detection level is set to
the factory default.
9) Heat_Run
The specified track is played repeatedly.
10) ---end menu---
The end of the FUNCTION check mode's
menu is displayed.
・
When the BACK (
) button is pressed
while the FUNCTION check mode is being
executed or after the FUNCTION check mode
has been executed, the FUNCTION check
mode's top menu reappears.
・
When the BACK (
) button is pressed
before the FUNCTION check mode has been
executed, the service mode's top menu reap-
pears.
2.1
HD2500_Init
mode
・
Turn the Deck1 or Deck2 PARAMETERS knob
to select "HD2500_Init" from the FUNCTION
check mode's top menu, then press the
PARAMETERS knob to set “HD2500_Init”
mode.
・
The contents of the preset memory are set to
the factory defaults. For details on the preset
memory, see the DN-HD2500's Instruction
Manual.
・
"Complete!!" is displayed when initialization is
completed.
No
Mode
Operation and Function
Display
0 ---top menu---
1 HD2500_Init
2 *RAM_Check
3 *CPU-DSP_Check
4 HDD_Format
5 Drive_CHK
6 *Audio_OSC
7 TOUCH_Init
8 Heat_Run
9 ---end menu---
When the PARAMETERS
knob is turned, items 0 to 9
are displayed, three items
at a time.
When the PARAMETERS
knob is pressed to set the
selected item, the item is
highlighted.
The checked contents and
results are displayed.
When the process
has completed
normally
When the process
has completed
abnormally
2
FUNCTION チェッ
クモード
・Deck1 または Deck2 の PARAMETERS ノブを回
わして、サービスモードの T O P 画面から
FUNCTION CHK を選択し、PARAMETERS ノブ
を押して確定します。
① ---Top menu---
FUNCTION チェックモードのメニューの先
頭を示します。
② HD2500̲Init
プリセットメモリの内容を工場出荷状態に
設定します。
③ *RAM̲Check
未対応。
RAM の固定アドレスのリード / ライト
チェックを行います。
④ *CPU-DSP̲Check
未対応。
CPU-DSP 間の通信チェックを行います。
⑤ HDD̲Format
内蔵 HDD を FAT32 でフォーマットします。
⑥ DRIVE̲Check
DRIVE 端子の送受信チェックを行います。
⑦ *Audio̲OSC
未対応。
LINE OUT1/2 端子にテスト信号を出力しま
す。
⑧ TOUCH̲Init
JOG ダイヤルのタッチ検出レベルを工場出
荷状態に設定します。
⑨ Heat̲Run
指定された曲をリピート再生します。
⑩ ---end menu---
FUNCTION チェックモードのメニューの最
後を示します。
・FUNCTION チェックモード実行中または実行
後に BACK(
) ボタンを押すと、FUNCTION
チェックモードの TOP 画面に戻ります。
・F U N C T I O N
チェックモード実行前に
BACK(
) ボタンを押すと、サービスモー
ドの TOP 画面に戻ります。
2.1
HD2500̲Init
モード
・Deck1 または Deck2 の PARAMETERS ノブを回
わして、FUNCTION チェックモード画面から
HD2500̲Init を選択し、PARAMETERS ノブを
押して確定します。
・プリセットメモリの内容を工場出荷状態にし
ます。プリセットメモリの詳細は、DN-HD2500
の取り扱い説明書を参照して下さい。
・初期化が終了すると、Complete!! を表示しま
す。
No
モード
操 作 と 機 能
表 示
0 ---top menu---
1 HD2500_Init
2 *RAM_Check
3 *CPU-DSP_Check
4 HDD_Format
5 Drive_CHK
6 *Audio_OSC
7 TOUCH_Init
8 Heat_Run
9 ---end menu---
PARAMETERSノブを回わ
すと、0〜9の項目が3
つずつ表示されます。
PARAMETERSノブを押し
確定すると、反転表示
されます。
チェック内容と結果が表示
されます
。
正常終了時
異常終了時
Summary of Contents for DNHD2500 - Dual DJ MP3 Player
