Denon DN-V1700, Service Manual

Page: 21 / 51

21
DN-V1700
Description Pin No. Name
Buffer
Type
Symbol
120 Receive Clock RX25
I with Input. Receive clock input from MII. Nibble rate clock. (25MHz for 100Mbps &
pullup 2.5MHz for 10Mbps).
123-126 Receive Data
RXD0- I with
Inputs. Received Data nibble from MII PHY.
RXD3 pullup
27
Management Data
MDI
I with
MII management data input.
Input pulldown
28
Management Data
MDO O4 MII management data output.
Output
29 Management Clock MCLK O4 MII management clock
I with
Input. Indicates a code error detected by PHY. Used by the LAN91C111 to
128 Receive Error RX_ER
pulldown
discard the packet being received. The error indication reported for this event is
the same as a bad CRC (Receive Status Word bit 13).
nChip Select
Output. Chip Select provided for mapping of PHY functions into LAN91C111
4
Output
nCSOUT O4 decoded space. Active on accesses to LAN91C111’s eight lower addresses
when the BANK SELECTED is 7.
14 External Resistor RBIAS NA
Transmit Current Set. An external resistor connected between this pin and GND
will set the output current for the TP transmit outputs.
16 TPO+ O/I Twisted Pair Transmit Output, Positive.
17 TPO- O/I Twisted Pair Transmit Output, Negative.
19 TPI+ I/O Twisted Pair Receive input, Positive.
20 TPI- I/O Twisted Pair Receive input, Negative.
24 nLEDB OD PHY LED Output.
25 nLEDA OD PHY LED Output.
Note (1) - If the EEPROM is enabled.