Denon AVR-S940H Service Manual Download

Page: 137 / 173

3-5. TUNER STEP mode (E2 / E3 only)

3-5.1. Actions

This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.

3-5.2. Starting up

AVR-X2500H

• While holding down buttons "

ZONE2 SOURCE

", "

DIMMER

" and "

STATUS

" simultaneously, press the

power button to turn on the power.

AVR-S940H

• While holding down buttons "

TUNER PRESET CH +

", "

TUNE -

" and "

TUNE +

" simultaneously, press

the power button to turn on the power.

Select the "

5. TUNER FRQ SET

" using the "

TUNER PRESET CH +/-

" button, then press the "

STATUS

button then to confirm.

3-5.3. Displays

Start up this unit in TUNER STEP mode, select the desired option using the "

TUNER PRESET CH +/-

button, then enter using the "

STATUS

" button.

The following information is displayed in the following order.

(1) AM9 kHz / FM50 kHz is selected

< AM9/FM50 >

TUNER PRESET CH +

TUNER PRESET CH -

(2) AM10 kHz / FM200 kHz is selected

< AM10/FM200 >

STATUS

(3) Press the power button to turn off the power.

(4) Press the power button to turn on the power.

3-6. Remote ID Setup Mode

3-6.1. Actions

This function allows only the desired AV receiver to be operated if multiple DENON AV receivers are

used in the same room.

3-6.2. Starting up

AVR-X2500H

• While holding down buttons "

ZONE2 SOURCE

", "

DIMMER

" and "

STATUS

" simultaneously, press the

power button to turn on the power.

AVR-S940H

• While holding down buttons "

TUNER PRESET CH +

", "

TUNE -

" and "

TUNE +

" simultaneously, press

the power button to turn on the power.

Select the "

6. REMOTE ID

" using the "

TUNER PRESET CH +/-

" button, then press the "

STATUS

button then to confirm.

3-6.3. Operations

(1) When Remote ID Setup mode is activated, the following message is displayed.

REMOTE ID ?

(2) Press the desired "

QUICK SELECT 1 - 4

" button.

Button

Display

QUICK SELECT 1

REMOTE ID 1

QUICK SELECT 2

REMOTE ID 2

QUICK SELECT 3

REMOTE ID 3

QUICK SELECT 4

REMOTE ID 4

(3) Press the power button to turn off the power.

(4) Press the power button to turn on the power.

Only "

QUICK SELECT 1 - 4

" and the POWER button on the unit can be used in Remote ID Setup

Mode.

The remote ID of the remote control supplied with this unit cannot be changed.

NOTE :

If the ID of the unit and remote control do not match, "

AVAMP

" appears on the display of the unit

when the remote control is used

(

: own remote control ID).

Before Servicing

This Unit

Electrical

Mechanical

Repair Information

Updating

137

Summary of Contents for AVR-S940H













































































































































































Search results

Summary of Contents for AVR-S940H

Reviews:

Related manuals for AVR-S940H

Brands by name

Popular brands

Denon AVR-S940H, Service Manual

Search results

Summary of Contents for AVR-S940H

Reviews:

Related manuals for AVR-S940H

Brands by name

Popular brands