Multi-zone Operations
Turning the Power On and Off
G
Operation on the main unit
H
Press
<ZONE2 ON/OFF>
.
When the power turns on, the multi-zone indicator (
) lights on
the display.
G
Operation on the remote control unit
H
Press
[ZONE2 ON]
or
[ZONE2 OFF]
.
Selecting the Input Source
G
Operation on the main unit
H
q
Press
<ZONE2/REC SELECT>
and select the zone to be adjusted.
w
Turn
<SOURCE SELECT>
.
G
Operation on the remote control unit
H
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[SOURCE SELECT]
.
Adjusting the Volume
G
Operation on the main unit
H
q
Press
<ZONE2/REC SELECT>
and select the zone to be adjusted.
w
Turn
<VOLUME>
to adjust.
G
Operation on the remote control unit
H
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[VOLUME]
.
<ZONE2 ON/OFF>
<ZONE2/REC SELECT>
<SOURCE SELECT>
<VOLUME>
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]
[SOURCE
SELECT]
[VOLUME]
[MUTING]
[Variable range]
– – –
–70dB
~
–40dB
~
+18dB
• The volume can be increased up to the value set at menu “Manual
Setup” – “ZONE2 Setup” – “Volume Limit” (
v
page 29).
• The ZONE2 volume can be adjusted only when “ZONE2” is selected
at menu “Manual Setup” – “Option Setup” – “Amp Assign”
(
v
page 29).
Turning off the Sound Temporarily
q
Set
[SOURCE CONTROL 1]
to “AUDIO” and
[SOURCE CONTROL 2]
to “ZONE2”.
w
Press
[MUTING]
.
The sound is reduced to the level set at menu “Manual Setup”
– “ZONE2 Setup” – “Mute Level” (
v
page 29).
To cancel, either adjust the volume or press
[MUTING]
again.
The setting is canceled when the zone’s power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL, OPTICAL or HDMI
connectors cannot be played in multi-zone.
[ZONE2 ON]
[MAIN ON]
[MAIN OFF]
[SOURCE
SELECT]
[ZONE2 OFF]
• Also press
[SOURCE SELECT]
when in standby mode, the power
turns on.
• When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing
[MAIN ON]
or
[MAIN OFF]
.
[Front]
[Rear]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
Specifi
cations
