Denon AVR-1509, Owner'S Manual

Page: 33 / 56

Operating from the remote control unit
Press
[NIGHT]
.
OFF Low Mid
High
S3 Default
Resets the settings to the default values.
[Selectable items]
Yes
: Reset.
No
: Do not reset.
S2 Night Mode
Optimized setting for late-night listening.
Set the dynamic range compression of the output audio.
[Selectable items]
OFF
: Turn night mode off.
Low
: Low setting.
Mid
: Middle setting.
High
: High setting.
“Night Mode” and “Default” ············································For details on adjusting individual parameters, see “Adjusting the Parameters” ( v page 25).
NOTE
• When the “Dynamic EQ” setting is “ON”, setting is not possible.
• When the “Dynamic Volume” setting is “ON”, setting is not
possible.
Information
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using
<STATUS>
.
O F F S E T - 4 d B
The fi gure is the correction value when the standard level is
corrected.
• The items displayed will differ depending upon the current settings,
the presence or absence of an input signal or the type of input signal,
etc.
• For details of the content of the items displayed, refer to the page
containing an explanation of the settings.
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press
<STATUS>
.
The information is displayed for several seconds before the display
returns to its original condition.
[Items to be checked]
• Surround Mode
• Input signal
• Dialogue normalization
• Input function
• Input digital terminal
• Audio Delay
• Tone Control
• Channel level of each speaker
• Cinema EQ
• Night Mode
etc.
<STATUS>
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Getting Started
Connections
Setup
Playback
Remote Control
Information
Troubleshooting
ENGLISH
Specifi
cations