14
Additional Functions
To select a Repeat mode,
press
Repeat
on the remote control, or press
Shift
and
Skip Back
(
) on
DN-500BD MKII. It will cycle through 3 modes:
•
Off:
Normal operation.
•
Repeat Track:
The current track will repeat continuously. In this Repeat mode, pressing
will
Skip Back
/
Forward
(
/
) will skip to the beginning of the current chapter only.
•
Repeat All:
The current title will repeat continuously.
To select a playback mode,
press
Random
on the remote control. It will cycle through 3 modes:
•
Shuffle:
Tracks on the CD will play in a random order without repeating. When all tracks on the CD
have played, playback will stop (unless a Repeat mode is selected).
•
Random:
Tracks on the CD will play in a random order. Playback will continue indefinitely. Also,
tracks will also be allowed to play more than once.
•
Off:
Normal operation.
To loop a section of the track:
1.
Set the desired starting point by pressing
A-B
on the remote control, or press
Shift
and
Skip Forward
(
) on DN-500BD MKII.
A-
will appear on the screen.
2.
Set the desired ending point by pressing
A-B
on the remote control again, or press
Shift
and
Skip
Forward
(
) on DN-500BD MKII again.
A-B
will appear on the screen, and the loop will start and
repeat continuously.
3.
To stop the loop, press
A-B
on the remote once more, or press
Shift
and
Skip Forward
(
) on DN-
500BD MKII once more.
A-B
will disappear from the screen, and playback will continue normally.
To jump to a specific track of the disc:
1.
Use the
number buttons
(
0
–
9
) on the remote control to select the number of the desired track.
2.
To confirm your choice, press
OK
or wait a few seconds. The desired track will start playing.
To cancel, press
Clear
.
To jump to a specific track or time of the disc:
1.
Press
GoTo
on the remote control. The Information panel will appear at the top of the screen. (To
cancel the operation before selecting a track or time, press
GoTo
again or wait until the blue square
cursor in the Information panel disappears, and then press
Info
.)
2.
Use the
left
/
right
cursor buttons
(
) to select either of the available fields:
•
Track:
Press
OK
to “unlock” this field. Use the
up
/
down cursor buttons
(
) or
number
buttons
(
0
–
9
) to select the number of the desired track, and then press
OK
to jump to it.
•
Time:
Use the
up
/
down cursor buttons
(
) to select whether these 3 fields show the
elapsed time for the
Track
or
Disc
. After that, press
OK
to “unlock” these 3 fields. Use the
left
/
right
cursor buttons
(
) to select each field: hours, minutes, and seconds. Use the
up
/
down cursor buttons
(
) or
number buttons
(
0
–
9
) to enter each as a 2-digit
number. Press OK to jump to that time in the track or disc.
3.
To jump to another location, repeat
Steps 1
–
2
.
To close the Information panel, press
Info
.
All
TRACK
TRACK
DISC
DISC
Summary of Contents for DN-500BD MKII
Page 2: ...2 ...
Page 148: ...denonpro com Manual Version 1 1 ...
