WARN INDUSTRIES
PAGE 4
70208A2
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
III. INSTALLATION
1.
Loosen the front bottom skid plate by
removing the front two 6mm bolts, Figure 1.
Keep the 6mm bolts for reinstallation of the
skid plate. Skid plate will not be removed from
vehicle, only will be rotated down. This will
allow room for winch plate installation.
2.
Place winch mounting plate (A1) sideways in
between the front tube guards and vehicle
frame, Figure 2.
3.
Rotate winch mounting plate (A1), Figure 3. Tilt
winch mount forward by raising rear face such
that the front right corner clears the front tube
guard, Figure 3.
Figure 1 Loosen Front Skid Plate
Figure 2 Install Winch Mounting Plate
Figure 3 Rear Support Mount Bracket
Remove Skid
Plate Bolts
A1
Rear Face
Front Right Corner
Front Tube Guards
A1
