Denlar ClockBox Pro, Installation And Operation Manual

Page: 4 / 38

Clock Box PRO Installation and Operations Manual V1.1 LAB-110218
4
Clock Box PRO and Hood Interface Diagram
Non- Plug‘N’Play
1. 120 VAC Input (not provided)
a. 120 VAC / 15 Amp circuit (provided by installer)
2. Junction Box (not provided)
a. Run the 120 VAC Input to the Junction Box
b. Run the 12-2 MC (3) wire, with the red tape, from the Hood to the Junction Box
c. Run a new cable (4) (not provided) from the Junction Box to the Clock Box PRO Control
Box
d. Wire nut the Hot leads from the three wires (1, 3, 4) together
e. Wire nut the Neutral leads from the three wires (1, 3, 4) together
f. Connect the grounds accordingly (1, 3, 4)
3. Metal Clad 12-2 MC wire with red tape from the Hood (provided)
4. Cable to provide 120 VAC from the Main Breaker Panel to the Clock Box PRO (not provided)
1
3
120 VAC Input (not provided)
6 5
4
7
8
10
9
Electrical Disconnect
CB1 / CB2
2
ED1