®
smartDEN
IP-Maxi
User Manual
09 Mar 2018
- 43 -
Figure 7.16.
SNMP Trap Value
="1 (On)",
Trap Sending
="Level Triggered"
o
2 (Both)
–
Counter
update takes place on each Digital Input state change
(both falling and rising edges). With
SNMP Trap
enabled and
Trap
Sending
="Edge Triggered" both edges trigger a trap message (Fig. 7.17).
With
SNMP Trap
enabled and
Trap Sending
="Level Triggered" the trap
message is sent in intervals of 5 seconds regardless of the Digital Input
state (Fig. 7.18).
Figure 7.17
.
SNMP Trap Value
="2 (Both)",
Trap Sending
="Edge Triggered"
Figure 7.18
.
SNMP Trap Value
="2 (Both)",
Trap Sending
="Level Triggered"
Save
button
- once you have changed the settings as required, click this
button.
