Page 5
3. Relay Outputs
The module provides 12 SPTD relays (NO, C, NC) and for every relay there is led
indicator showing the relay state. When the led is ON, that means the relay is
activated and when OFF, the relay is not activated.
Figure 2.
Location of the relays
Table 1. Relays electrical characteristics
Relay outputs count
12
Contact type
NO, NC
Current consumption
mA
15
Switching parameters
A
A
A
A
10 (28 VDC)
15 (120 VAC)
10 (250 VAC)
Table 2. Mapping to
DAEnetIP4
JP1/JP3 digital output port
Digital output pin # (DAEnetIP4 JP1 and
JP3)
Relay # (from peripheral board)
Digital Output #1 (JP1.1)
Relay 1
Digital Output #2 (JP1.2)
Relay 2
Digital Output #3 (JP1.3)
Relay 3
Digital Output #4 (JP1.4)
Relay 4
Digital Output #5 (JP1.5)
Relay 5
Digital Output #6 (JP1.6)
Relay 6
Digital Output #7 (JP1.7)
Relay 7
Digital Output #8 (JP1.8)
Relay 8
Digital Output #9 (JP3.1)
Relay 9
Digital Output #10 (JP3.2)
Relay 10
Digital Output #11 (JP3.3)
Relay 11
Digital Output #12 (JP3.4)
Relay 12
