Denison Hydraulics P07 C-mod, Service Information, Page: 17 / 80

CONVERSION
17
E, H, R CONTROLS
LOCATION
(item 31 Fig. 1)
E, H, R CONTROLS
LOCATION
(item 31 Fig. 1)
Figure 5
CONTROL ORIENTATION VERSUS PUMP ROTATION
ROTATION CONVERSION
The following parts and assembly are required for changing shaft rotation:
• A different barrel and port plate assembly is required. The barrel and port plate are matched assemblies, and should
not be ordered separately. The reference part numbers are:
CW - Barrel and Port Plate Assembly S22- 16
145
CCW - Barrel and Port Plate Assembly S22- 16
146
• The control piston must be reversed to position it correctly to the control caps. See step 9 pg. 20)
• The control caps location are reversed. see illustrations below.
C, J, K, L, V, W CONTROLS
LOCATION
(item 50 Fig. 1)
Figure 4
www.comoso.com