bio.x T700 160416
Page 5 of 16
10/2008
4. Product description
4.1 Intended use
The bio.x parts cleaning unit is used to clean oil and grease from work pieces in an efficient, environmentally
sustainable way using exclusively cleaning fluids authorised by DENIOS.
Other detergents such as degreasers or alkali cleaning agents must
not
be used!
Solvents, disinfectants, alkali or acidic fluids, carburettor and diesel fuels or turpentine must not be poured
into the appliance.
4.2 Layout
Lower part
-
Material PE
-
Maximum fill capacity
120l
-
Minimum fill capacity
60l
Item
Description
Function or description
Mat. No.
1 Electrical compact control
With on/off switch and 2-digit 7-segment display
169682
2 Heating element, output 1kW
Version with central connection and firmly sealed cable 3x1.5mm²
178986
3 PT 100 temperature sensor
Temperature control (41°C)
135266
4 Level switch
Recording the minimum fill level, plastic version with firmly sealed
PVC cable 3x0.34mm²
135274
5 Electrical aerator (5W)
Oxygen supply for the bacteria in the cleaning device
138281
6 Suction filter (350µm)
Protection against contamination in the feed pump inlet
168159
7
Feed pump,
temperature monitored *
Three-compartment membrane pump which can run dry safely,
operating pressure approx. 6bar, flow rate 4 l/min
160253
8 Foot switch/button (optional)
For turning the cleaning function and the demister on and off
150097
9 On/off button
For turning the internal light on/off (optional)
162245
10 Feed cable with plug
160517
11 Drain tap
To drain the used cleaning fluid
162221
* When replacing the connections of the hose feed, seal with a Teflon band
Upper part
-
Material PE
-
to be placed on the lower part of the appliance
-
with back and side walls and a removable work surface
-
Load capacity: 200 kg
-
Usable work surface: 750x900x550 mm
Item Description
Function or description
Mat. No.
12
Filter screen (600µm)
For filtering out coarse particles
135256
13
Interior lighting (optional)
Protective tube light IP67, 1x24W
172777
15
Lamella protective plate
Stainless steel, to cover the ventilation opening
162335
16
Pressure hose
Feed to the Vario nozzle, cut 1100 mm
162495
17
Vario nozzle
Can be adjusted from point to surface jet and unpressurised
168143
18
Wash brush
For manual cleaning
168024
19
Compressed-air nozzle (optional) For fast drying of the cleaned workpieces
168250
20
Holder
To hold the nozzles and the brush
168767
21
Work surface (fold-away shelf)
In blue
161846
22
SET: Vario nozzle and wash
brush with hose system
162496
23
Nozzle for demister
To blow clean the hood
163366
Hood
-
Material: transparent thermoplastic
-
surrounding seal, lock and reach-through gauntlets
Item Description
Mat.
No.
24 Hood
162349
25 Reach-through
gauntlet
168036
26 Lock
160262
27 Seal
162482
