Deltec CADD-Prizm VIP PCA 6100, Patient Information

Page: 11 / 34

9
Press
Battery
Door
Button
pen
on»
m Match
attery»
To install a new battery:
1. Stop the pump by pressing
⁄
.
2. When you see Stop the
pump? , press
´
.
3. Press the button on the battery
door and slide the battery
door forward. Remove the
used battery.
4. Match the + and – markings on
the new battery with the
markings on the pump. Insert
the battery. The pump will
beep if the battery is inserted
correctly.
5. Replace the battery door. The
pump will power up auto-
matically.
6. Start the pump by pressing
⁄
.
7. When you see Start the
pump? , press
´
.
NOTE:
• If you put the battery in backwards, the display will remain
blank. Reinsert the battery, making sure to match the +
and – markings.
The power up sequence will start, the pump will go
through an electronic self-test, and the pump will beep at
Start the Pump?
Press Y or N
Stop the Pump?
Press Y or N