RetroSign GR1 & GR3 · Retroreflectometer
23
When turned ON the instrument will try to reconnect to the last known Bluetooth master and will not be searchable.
By selecting the Discoverable mode, the instrument can be discovered by other Bluetooth masters.
A Bluetooth ICON appears in the top right display corner. It shows a broken Bluetooth symbol when not connected, see
Menu 3. When a connection has been set up, the ICON changes to show the normal Bluetooth symbol. See Menu 4.
Note: First time you whish to connect a Bluetooth master to the instrument you have to select the
Discoverable
option
The Bluetooth master can locate and connect to the instrument. The instrument will then automatically try to reconnect to
the known master each time it is turned on.
Use the default access code 1234 on the master when asked.
The Bluetooth name will be: ”
RS-GR3:serial number
” e.g. RS-GR3:12345678
When connected, the Bluetooth connected LED is turned on. It is located near the USB connector on the instrument back
plate.
The Bluetooth status can be checked in the
Info Page: Bluetooth
; here the device name and the ID of the connected
Bluetooth master will be displayed.
Connected to BT master 123123123BDC
BT Enabled but not connected
