Chapter 3 Using EzDMC
PCI-DMC-A01/B01 User Guide
July 2014
3-11
➎
Data read and write area. (Please see Figure 3.14 for details)
➏
Change password field.
Step1: Enter two new passwords in the "Password" field. Each is 1~8 bits in length and
takes hexadecimal values between 0~F.
Step2: Enter the same password from "Password" in "Confirmation" again for
verification.
Step3: If the two passwords in "Password" and "Confirmation" match, clicking on "Write"
will change the password. If the passwords do not match, then block
❷
will
show the error message "Confirmation Error". The change password procedure
must now be repeated again.
Below is a more detailed description of block
➎
in Figure 3.13
Figure 3.14 Description of master security block
➎
functions
(1) Page
: Page to read or write to (0 ~ 9).
(2)
Read
: Read data from specified page.
(If read successful then block (5) will display 16 binary 0 ~ F hexadecimal values)
(3) Write
: Data to write to specified page.
Step 1: In block (6), please fill in the desired 16 binary 0 ~ F hexadecimal values.
Step 2: Check "Write Enable" and Status bar will now display "Write/Read."
Step 3: Click on "Write" to write data.
(4)
Sync
: Copy data from block (5) to block (6).
(5)
Displays the output data when Read function is executed.
(6)
Contains the input data when Write function is executed.
(7)
Status
: Shows the read status as either Read-only or Write/Read.
(8) Write Enable
: Change status to Write Enable.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
