Delta PCI-DMC-A01, User Manual, Page: 12 / 64

PCI-DMC-A01/B01 User Guide Chapter 1 Installation Environment
1-8
July 2014
 CN10: 3.3V Compare Output 2
Figure 1.11
CN10 pin definition
CN10 is for PCI-DMC-B01 only. PCI-DMC-A01 does not
contain this part.
※
This is the socket-side pin definition. PIN 1 on the cable
corresponds to PIN 4 here.
Pin Label Description
1 CMP_OUT2(QEP2)
CMOS 3.3V to level comparison
trigger signal output
2 GND GND Signal
3 CMP_2+(LVDS) LVDS Differential Signal ( + )
4 CMP_2- (LVDS) LVDS Differential Signal ( - )
 SW1: Dial for Setting the Card ID Number
Figure 1.12
SW1 dial
Card ID is the value that the dial is turned to.
It can be set to a value between 0 ~ 15.
※
This dial is used to set the Card ID on PCI-DMC-A01 /
PCI-DMC-B01 Ver.2.0.
 SW1: Card ID Number Configuration Switch
Figure 1.13
SW1 Dip Switch
Card ID = Bit3x2*
3
+Bit2x2*
2
+Bit1x2*
1
+Bit0x2*
0
※
This dip switch is used on PCI-DMC-A01 Ver.1.1 to set the
Card ID.
Pin Label Description
1 Bit3 Card ID Bit3
2 Bit2 Card ID Bit2
3 Bit1 Card ID Bit1
4 Bit0 Card ID Bit0
1 4