Chapter 3 Using EzDMC
PCI-DMC-A01/B01 User Guide
July 2014
3-7
3.7 Multi-axis Control Interface
When you have added the connected extension modules to the serial communications link,
if you wish to perform multi-axis motion control then click on the third menu motion (marked
with square bracket
) in the EzDMC "Toolbar" to execute Multi-Axis Control. The
multi-axis control window will appear in the right display block (
) as shown in Figure 3.9.
Figure 3.9
The multi-axis control window will be divided into four blocks and each explained
individually on the following page.
