The illustrations in this section show the
M88H_121 (ST). The procedure for the
M88H_122 (CF) is identical.
1. For
vertical
mounting of the inverter, attach the mounting
plate to the wall/the mounting system using 8 M8 screws
as shown in the illustration on the left.
Be sure to use these 8 fixing points in any event when
using more than 8 screws.
For
tilted
or
horizontal
mounting of the inverter, attach
the mounting plate to the wall/the mounting system with
10 M8 screws in accordance with the illustration on the
left.
Be sure to use these 10 fixing points in any event when
using more than 10 screws.
Quick installation guide for solar inverter M88H RPI883M121300 RPI883M122300 EU V1 EN 5017414200_00 2019-11-07
26
Mounting the inverter
