Chapter 3 Introduction to Functions
3-47
_3
8.
When the service status is shown “Enable”, that means the DIACloud service is actived on DX-3001H9. The user also
can get the related information in cloud platform.
9.
Click the “Unbind” button, DX-300H9 will remove the registered account in DIACloud.
Description
Default
User Name
Set up the name for the DIACloud account.
N/A
Password
Set up the password for the account.
N/A
Verify
Check if the username and the password are matched.
N/A
Secure Tunnel
Select the device under the account to join in a certain secure tunnel network
group. For secure tunnel related settings, go to
http://www.DIACloudsolutions.com/
Default
Device Name
Set up the name for the device
N/A
Secure Tunnel DHCP
When secure tunnel DHCP server is available, and the IP address is allocated
by the DHCP server in secure tunnel network, the IP address of this device can
be found in the cloud portal.
N/A
Get IP From Cloud
When selecting “Yes”, IP address can be obtained by the cloud. When
selecting “No”, the IP address can be manually set.
Yes
Network protocol
Summary of Contents for DX-3001 Series
