background image

9 - 2

Ultron DPS Series

There are several optional accessories available for this DPS series UPS. Please refer to the table 
below for the optional accessories and their descriptions.

No.

Item

Function

1

Dust Filter

Prevents dust from entering into the UPS to ensure 
UPS reliability and to prolong product life.

2

SNMP Card (IPv4 or IPv6)

Monitors the status of the UPS via internet.

3

Relay I/O Card

Increases the quantity of dry contacts.

4

ModBus Card

Lets the UPS have ModBus communication 
function.

5

Battery Cabinet Temperature 
Sensor Cable

Detects the temperature of an external battery 
cabinet connected to the UPS.

REFERENCE:

 

1.  For detailed installation and operation of any accessory mentioned above, please refer 

to the 

Quick Guide, User Guide,

 or 

Installation & Operation Guide

 included in the 

package of the relevant optional accessory.

2.  If you want to buy any accessory mentioned above, please contact your local dealer or 

customer service.

Summary of Contents for DPS-500K

























































































































































Reviews: