D e lt a M u lt i- C ir c u i t P o w e r M e t e r D P M - M A11 2 1 U s e r M a n u a l
4 - 1 0
4
4.1.5.6 Block Transfer Address Setting (UDFxxP)
……
UDF01P
~
UDF20P
Block transfer parameter address setting. The configurable items include 20 custom addresses such as
UDF01P~UDF20P. The configurable address range is 0x0 ~ 0x1E, and the default value is 0.
Steps of setup are as follows
：
1.
Press the ENTER key on the parameter page, the setting starts after the number flashes.
2.
Use UP and DOWN to select the numeric.
3.
Press LEFT key move to next digit.
4.
Repeat step 2 to 3 until finishing 4-digit setting, press ENTER key to save and return to the next parameter page.
※
Press LEFT key and hold 2 seconds to cancel input and return to the previous menu.
4.1.6
Date and Time (Time Group)
4.1.6.1 Date
Date setting. The selectable range is 2010/1/1 ~ 2099/12/31.
Steps of setup are as follows:
1.
Press ENTER on the parameter page and start setting after the number flashes.
2.
Press UP or DOWN to select the numeric.
3.
Press LEFT key move to next digit.
4.
Repeat step 2 to 3 until finishing setting, press ENTER key to save and return to the next parameter page.
※
Press LEFT key and hold 2 seconds to cancel input and return to the previous menu.
4.1.6.2 Time
