C h a p t e r 4 O p e r a t i o n s
4 - 9
4_
4.1.5.3 Parity Check (Prity)
Communication parity check bit setting. The selectable range is N.8.1
、
N.8.2
、
O.8.1
、
E.8.1. The default value is
N.8.2.
Steps of setup are as follows:
1.
Press the ENTER key on the parameter page, the setting starts after the content flashes.
2.
Use UP and DOWN to select parity check.
3.
Press ENTER key to finish setting and back to next parameter page.
※
Press LEFT key and hold 2 seconds to cancel input and return to the previous menu.
4.1.5.4 Data Format (Format)
Communication data format setting, the format can be set with big-endian (Hi), little-endian (Lo), and the default
value is big-endian.
Steps of setup are as follows
：
1.
Press the ENTER key on the parameter page, the setting starts after the content flashes.
2.
Use UP and DOWN to select the format.
3.
Press ENTER key to finish setting and back to next parameter page.
※
Press LEFT key and hold 2 seconds to cancel input and return to the previous menu.
4.1.5.5 Advanced Menu Functions (Prog)
Basic menu
Advanced menu
Advanced menu settings, the menu modes that can be set include basic menu (basic) and advanced menu (Advnc).
When it is set to advanced menu, the 4.1.5.6 block transfer setting page will appear. The default value is the basic
menu.
Steps of setup are as follows
：
1.
Press the ENTER key on the parameter page, the setting starts after the content flashes.
2.
Use UP and DOWN to select the menu mode.
3.
Press ENTER key to finish setting and back to next parameter page.
※
Press LEFT key and hold 2 seconds to cancel input and return to the previous menu.
