BECT832-SSO Screwdriver Controller
Operation Manual
DELTA REGIS
Tools Inc.
www.deltaregis.com
BECT832-SSO Screwdriver Controller
Operation Manual
DELTA REGIS
Tools Inc.
Display Codes
www.deltaregis.com
When waiting for operator or external input, the LED display will show one of a series of codes, depending
on the DIP switch settings and the expected input. Further explanation is provide below.
Waiting for input from a single external
switch connected to GATE input.
DIP Settings - SW2(On), SW3(Off), SW4(Off)
Waiting for input from two external
switches connected to GATE input.
DIP Settings - SW2(On), SW3(Off), SW4(On)
Waiting for operator to press SELECT/
CONFIRM to verify batch reset.
DIP Settings - SW2(Off), SW3(On), SW4(Off)
Waiting for input from 1 external switch
and manual SELECT/CONFIRM.
DIP Settings - SW2(On), SW3(On), SW4(Off)
Waiting for input from 2 external
switches & manual SELECT/CONFIRM.
DIP Settings - SW2(On), SW3(On), SW4(On)
Waiting for operator to press CLEAR.
Error detected during input of
confirmation signal. Press SELECT/
CONFIRM again to acknowledge.
Incorrect set-up during programming
mode.
Example ‘Lt (min time) value
entered is > Ht (max time) value’.
The BECT832-SSO Controller is not user serviceable. Any repairs must be performed by a Delta Regis
authorized service center. Please consult Delta Regis Tools for further information and the location of the
nearest authorized service center.
Repairs to brushless DC screwdrivers must be performed by trained personnel, knowledgeable and
qualified in the repair of DC electric screwdrivers. Use only genuine Delta Regis parts when servicing
these products.
Do not attempt to modify the tools or controllers.
Service
The BECT832-SSO Controller is warranted for one year from the date of purchase against defects in
material and workmanship. This warranty does not cover damage due to transportation, abuse,
misuse, or improper service. Our sole remedy is to repair or replace (at our discretion) any unit found
to be defective due to defects in material or workmanship. It is the responsibility of the user to return
any product thought to be defective, freight prepaid, to our warehouse for inspection and evaluation.
There is no warranty of merchantability or fitness of purpose. In no event will Delta Regis Tools, Inc.
be liable for business interruptions, loss of profits, harm, injury, damage, personal injury, cost of delay,
or any other special, indirect, incidental, or consequential losses, costs, or damages.
Warranty
Page 15
