Delta OHM PMBsense-A, Operating Manual

Page: 17 / 24

PM[B]sense
- 17 -
V1.3
cessed to read the value. The register with lower address contains the most significant bits.
Coils:
Address Description Format
0 Set 1 to restore the factory configuration. Bit zeroing is au-
tomatic. Bit
1 Enable configuration change:
0=no (default), 1=yes.
The changes to
Coils and Holding Registers will be accept-
ed only if this register is set to 1.
Bit
2 Sets waiting time after transmission with MODBUS-RTU pro-
tocol:
0=immediate reception (default);
1=waiting 3.5 characters. Bit
3 Enable/disable the offset of the analog output 1:
0=offset disabled (0…20 mA or 0…10 V, default if the out-
put is voltage);
1=offset enabled (4…20 mA or 2…10 V, default if the output
is current).
Bit
4 Sets the direct or inverse correspondence between analog
output 1 and associated physical quantity:
0=4 mA/0 V

Min. quantity, 20 mA/10 V

Max. quantity
(default);
1=20 mA/10 V

Min. quantity, 4 mA/0 V

Max. quantity.
Bit
5 Enable/disable the offset of the analog output 2:
0=offset disabled (0…20 mA or 0…10 V, default if the out-
put is voltage);
1=offset enabled (4…20 mA or 2…10 V, default if the output
is current).
Bit
6 Sets the direct or inverse correspondence between analog
output 2 and associated physical quantity:
0=4 mA/0 V

Min. quantity, 20 mA/10 V

Max. quantity
(default);
1=20 mA/10 V

Min. quantity, 4 mA/0 V

Max. quantity.
Bit