EN
2
3
Recommendations
WARNING: Important security instructions
Incorrect installation may cause severe injury
Follow all the instructions and keep this installation guide in a safe
place.
- TYMOOV xF motors are designed solely for the operation of
roller shutters for home use. For any other use, please contact our
technical department.
- The minimum inner diameter of the roller tube is 47 mm, but the
tube must be chosen according to the weight and length of the
apron. Consult the tube manufacturers’ charts.
- Do not operate the roller shutter if people or objects are in the
movement area.
- The moving parts of the motor, installed at a height of less than
2.5m, must be protected.
- Before installing the motor, remove all superfluous cords and take
out of service any equipment not required for the motor to operate.
- IMPORTANT: Do not operate the shutters or cut off their power
supply when maintenance or cleaning work is being carried out on
the equipment or in close proximity (e.g. window cleaning).
- Monitor the shutter when it is moving and stand clear until it is
completely closed.
-
Do not allow children to play with the fixed control devices. Keep
remote control devices out of the reach of children.
- The operating device of an unlockable switch must be in direct view
of the driven part, but kept away from the moving parts. It must be
installed at a height of at least 1.5 m.
- The fixed control devices must be installed in a visible area.
- Frequently check the equipment to detect any imbalances or signs
of wear or damage to cables and springs.
- Do not use the device when repairs or adjustments are required.
Preliminary elements
- Sufficiently rigid roller shutter blades should be used.
- When the roller shutter is closed, the apron must not overlap the
runners by more than one 1/2 blade (max.).
- The apron fastenings or automatic fasteners used on the shutter
must comply with the recommendations for use provided by the
manufacturer
The maximum locked rotor torques for TYMOOV xF motors are:
10 Nm: 15Nm / 20 Nm: 27 Nm
Models which cannot support these torques cannot be mounted.
The number of fasteners must be adjusted according to the model
and number of links.
- If used with upper stops, preferably use systems built into the
runners.
- Pay attention to the frame rigidity with stop systems on the shutter
blades.
- TYMOOV xF motors check the physical stops every 100
operations, so the motor automatically compensates for any apron
movement.
- Correct operation of the motor is ensured if it is installed and used
according to the following recommendations.
The peripheral elements such as the roller tube, supports,
fastenings, etc. must be chosen correctly and assembled in
compliance with good practice. Furthermore, the motor operating
environment and power required are elements that must be
carefully chosen and assessed.
- A-weighted sound pressure level: LpA ≤ 70 dB(A).
